Attaching Audio Telephone Network Cables; Figure 2-9: Audio Board Connectors - PictureTel Concorde 4500 Administrator's Manual

CONNECTING AND CONFIGURING YOUR NETWORK
Attaching Audio
Telephone
Network Cables
2-14
If a POTS daughter board is present, you can connect a two-wire
telephone line to the Concorde¥4500, as follows:
1. Plug the telephone network cable into the phone wall connector on
the Audio board, shown in Figure 2-9 .
2. Plug the cable from the telephone into the phone set connector on
the Audio board, shown in Figure 2-9 .

Figure 2-9: Audio Board Connectors

7
A
B
8
AUDIO
Phone wall
Phone set