OBTAINING DIAGNOSTIC INFORMATION
Viewing Near-End Status
Table 7-1: Near-End Status Menu Options
Menu Option
View Network Statistics
View Call Parameters
View Last Ten Fault Codes
View Software Version
a
Monitor CSU
Clear Network Statistics
Clear Fault Codes
a. This item appears only when your system has an internal four-wire CSU network interface board
installed.
7-4
When you choose
View Near-End Status
you can choose from the selections in the following table:
Displays the current channel statistics.
Refer to Table 7-2 for SG3 and to Table 7-3 for SG4, H.261,
and H.263.
Lists the video transmission modes and frame rates (frames
per second) for the sending and the receiving sites.
Refer to Table 7-4.
Displays the last 10 fault codes.
Refer to Table 7-5.
Displays the system software version and lists the customer-
ordered options that are included on the software cartridge.
Refer to Table 7-6.
Displays the signals and status messages from both near-end
CSU channels.
Refer to Table 7-7 and Table 7-8.
Resets the channel statistics counters to zero.
Clears the fault code list.
from the Diagnostics menu,
Definition