Figure 2-4: Rs-449 Network Connection Panel On The Communications Board - PictureTel Concorde 4500 Administrator's Manual

CONNECTING AND CONFIGURING YOUR NETWORK
2-8
To connect your system to an RS-449 network interface:
1. Plug the network cables into the DC-37 CHAN connectors on the
Communications board RS-449 network panel, as shown in
Figure 2-4.
Take care when aligning the connectors.
Figure 2-4: RS-449 Network Connection Panel on
the Communications Board
2. Tighten the screws on the connectors.
RS-449
PORT 2
CHAN
CTRL
A
DIAL
PORT 1
CHAN
CTRL
B
DIAL