Setting The Near-End Site Name - PictureTel Concorde 4500 Administrator's Manual

5. Type the new password again, and press ENTER.
You return to the Set Password for Menus screen.
If you have enabled the use of a password (as described in
F.Y.I.
F Y I
the previous section), you must now use the new password
to have changes to the ConÞguration menus take effect or to
use the Diagnostics menus.

Setting the Near-End Site Name

You can name your site and, when the far-end system is conÞgured
to display site names, display that name on the far-end screen
during point-to-point and multipoint calls.
Your site name will appear on the far-end screen only if the
F.Y.I.
F Y I
video transmission format for the call is SG3.
Choose any name of no more than 16 alphanumeric characters. You
might use your own name or the name of your conference room or
city.
Seeing a site name is particularly helpful in a multipoint call
because all sites can identify each participating site.
To enter or to change your site name:
1. From the Set General Configuration menu, choose Set Near-End
Site Name .
The following message appears:
Current Site Name: (name)
Enter or change site name? No Yes
Setting the ConÞguration
4-13