Setting Audio Configuration - PictureTel Concorde 4500 Administrator's Manual

CONFIGURING AND ADJUSTING THE VIDEO AND AUDIO
Setting Audio
Configuration
Configure tabletop
microphones
Set a specific audio
transmission protocol or let
the system choose one
automatically
Adjust audio signal
processing to cancel
echos, filter out
background noise, and
maintain microphone
speech signals at a
constant level
Set the initial G.711 format
to A-Law or u-Law
5-10
To change the number of monitors:
1. From the Set Video Configuration menu, choose Select Number of
Monitors .
This message appears:
One [X]
Two
2. Select One or Two.
The Select Number of Monitors screen appears with an
to the new setting.
3. Exit from the menu session.
The changes take effect immediately.
When you choose
Set Audio Configuration
menu, the Set Audio ConÞguration menu appears:
from the ConÞguration
Set Audio Configuration
View Previous Menu
Set Microphones
Set Audio Send Format [Automatic]
Set Audio Signal Processing
Select Initial G.711 Format [µ-law]
next
[X]