CONFIGURING AND ADJUSTING THE VIDEO AND AUDIO
Setting VCR Operation
5-8
You can use the Set VCR Operation screen to conÞgure how you
want one or two VCRs connected to your system to function.
You can connect two VCRs to your system by plugging both into the
back connection panel, as follows:
Plug the Þrst VCR into the
and Video boards to use the VCR in record mode (when you
want to record video and audio from the videoconference).
Plug the second VCR into the
Audio and Video boards to use the VCR in play mode (as the
video source from your system when you press
The following table describes the
two VCRs connected to your system.
Table 5-3: VCR Record Mode Setting
Record
Number
Mode Setting
of VCRs
Near End
Far End
connections on both Audio
VCR OUT
VCR IN
Record Mode
1
The VCR records your video and
audio source, unless you are
sending
VCR
you are, the video is recorded but
the audio is not.
2
The Þrst VCR records your video
and audio source.
The second VCR sends video and
audio to the far end.
1 or 2
The Þrst or only VCR records the
video and audio transmitted by the
far end to the near-end monitor or
to the main monitor in a dual-
monitor installation.
The second VCR sends video and
audio to the far end.
connections on both
)
VCR
.
setting for one and
Definition
or previewing
VCR.
If