Camera Setting - Ganz digimaster DR-4FX1 Operation Manual

Camera Setting

You can configure the display settings of: camera title, covert option, motion and camera type
CAMERA TITLE
You can change the camera ID that is displayed on
the screen.
1. From <SYSTEM SETUP> - <CAMERA>, select
<CAMERA TITLE>.
2. Use the [▲▼◀▶/ENTER] buttons on the remote
control or use the mouse to select a channel that
you want to rename.
Alternatively, simply double-click the camera to
rename from the top left corner.
3. Once the virtual keyboard appeared, select desired
alphanumeric characters to complete your input,
and press the <OK> button.
The <SHIFT> key toggles letter case.

4. To apply the change, click <APPLY> in the bottom
of the screen.
5. When done, press the [EXIT] button on the remote
control or click <CLOSE> button.
The confirmation message appears and you will return to the previous menu.
 Camera title allows up to 16 letters, combining numbers and upper/lower case alphabets.
Image Setup
You can adjust brightness, contrast, color and quality setting of each channel's camera.
1. From <SYSTEM SETUP> - <CAMERA>, select <IMAGE SETUP>.
2. Use the [▲▼◀▶/ENTER] buttons on the remote
control or use the mouse to set each option of the
image menu.
3. To apply your changes, click <APPLY> button.
4. Once completed with setup, press [EXIT] button of
the remote control or click <CLOSE> button on the
bottom of the screen. A confirmation dialog appears
and returns to the previous menu.

Press <PREVIEW> button for adjusting with preview image.
System Setting
１３