Ganz digimaster DR-4FX1 Operation Manual page 33

System Information
You can check the current system version and system-related settings.
1. From <SYSTEM SETUP> - <SYSTEM>,
Select <SYSTEM INFORMATION>.
2. Check the status of the current system.
3. When done, press the [EXIT] button on the
remote control or click <CLOSE> button.
Control Device
Configure the settings of the remote control and
keyboard controller.
1. From <SYSTEM SETUP> - <SYSTEM>, select
<CONTROL DEVICE>.
2. Use the [▲▼◀▶/ENTER] buttons on the remote
control or use the mouse to set the connection
options for the control device.
>SYSTEM ID : Set the ID of the DVR so that the
keyboard controller can identify.
>PROTOCOL : Set up the protocol of the keyboard
controller.
>BAUD RATE : Specify the RS485 communication speed.
>REMOTE CONTROLLER ID : Set the ID of the remote control.
3. To apply the change, click <APPLY> in the bottom of the screen.
4. When done, press the [EXIT] button on the remote control or click <CLOSE> in the lower
screen. The confirmation message appears and you will return to the previous menu.
System Setting
３３