Ganz digimaster DR-4FX1 Operation Manual page 22

System Setting
SPOT OUT (1U Model)
Apart from the main screen display, you can configure the Spot Out to display a Live channel as
needed in various live view types. You can set the live view type of display output through the
[SPOT] terminal and activate / deactivate it.
1. From <SYSTEM SETUP> - <DISPLAY>,
select <SPOT OUT>.
2. Use [▲▼◀▶/ENTER] button of the remote
control or mouse to edit Spot Out properties.
>SPOT TITLE : Name the Spot Out setup.
>ACTIVATION : Set whether to activate /
deactivate the spot out setup.
>MODIFY : Edit the view type of the spot output.
>SAVE : Save the changes of spot output settings.
3. To apply your changes, click <APPLY> button.
4. Once completed with setup, press [EXIT] button of the remote control or click <CLOSE> button
on the bottom of the screen. A confirmation dialog appears and returns to the previous menu.
To add a View Type to a SPOT OUT
1. Select an item from the SPOT OUT list to be changed.
2. The "EDIT" window appears, click <EDIT> button.
3. When the View Type selection window appears,
click <ADD VIEW TYPE> button.
4. Select the desired View Type and configuration,
and click <OK> button.
5. Complete adding and click <CLOSE> to close
the edit window.

9 and 16 split screen mode are available only for 16 channel model.
To edit or delete View type of the SPOT Out
1. Select an item from the SPOT OUT list to be changed.
2. The "EDIT" window appears, click <EDIT> button.
3. When the View Type selection window appears,
select the desired View Type to be edited or
deleted, and press [ENTER] button of the remote
control or right click on it.
> MODIFY : Displays "SPOT SETUP" window
for editing View Type and other properties.
> DELETE : Deletes the selected View Type.
5. Complete editing and click <CLOSE> to close the edit window.
２２