Monitor; Camera; Camera Title : - Ganz Digimaster DR4HL Instruction Manual

STATUS BAR : Turns the status bar at the bottom of the live display ON or OFF.
CAMERA TITLE : Determines whether the camera title is displayed.
EVENT ICON : Determines whether the DVR recording status is shown at the top right of each channel
display window.
BORDER : Determines whether there is a border around each channel in multi screen display mode.
LANGUAGE: To change the Language, after selecting the language, please press the APPLY button, Then
system will reboot and language will be changed.
DISPLAY - MONITOR
SEQUENCE DWELL : The time that each screen is displayed in a sequence operation.
SPOT OUT DWELL : The time that each screen is displayed in a spot operation.
DE-INTERLACE MODE : When recording any channels in D1 resolution (704 x 480 / 704 x 576) this should be
set to
ALARM POP-UP MODE : When set to ON, an alarm input will cause the associated channel to display
ALARM POP-UP DWELL : Determines how long the full screen popup is displayed after an alarm input.
MOTION POP-UP MODE : When set to ON, motion detection will cause the associated channel to display
MOTION POP-UP DWELL : Determines how long the full screen popup is displayed after motion detection.
To change any of these settings, highlight MONITOR and press ENTER to select.
Use the CURSOR KEYS to navigate to the option required. Press ENTER to select the option (the cursor
changes to orange) and use the CURSOR KEYS to change the setting. Press ENTER to save the setting
or RETURN to cancel.
ON to prevent judder during playback.
full screen.
If the alarm condition continues, the popup screen is displayed constantly.
full screen.
If motion continues, the popup screen is displayed constantly.
Click the MONITOR menu and click the ON/OFF menu.
Then, click the
20
button for ON/OFF.