Ganz digimaster DR-4FX1 Operation Manual page 39

Buzzer output
You can notify the user of the event using the buzzer.
>DURATION
- TRANSPARENT : Keep the buzzer out for as
much time as the event lasts.
- UNTIL KEY : Keep the buzzer out until a mouse
or remote control button is pressed.
- 5 ~ 300 SEC : Keep the buzzer out for as long
as specified.
Display
If an event occurs, you can display the video screen or a popup message to notify the user.
>VIDEO POPUP : Display the video channel that is synchronized with the event on a single split
screen. Set the DURATION of the single split screen.
- TRANSPARENT : Keep the video popup
displayed for as much time as the event lasts.
- UNTIL KEY : Keep the video popup displayed
until a mouse or remote control button is pressed.
- 5 ~ 300 SEC : Keep the video popup displayed
for as long as specified.

If multiple events occur at the same time, or if
multiple event-related video channels exist, the
video popup will be displayed in the maximum
split screen mode rather than the single split
screen mode.
>OSD POPUP : This will notify the user of the event with a popup message if an OSD popup
event occurs. You can adjust the duration of the popup message.
- UNTIL KEY : Keep the OSD popup displayed until a mouse or remote control button is pressed.
- 5 ~ 300 SEC : Keep the OSD popup displayed for as long as specified.
System Setting
３９