Table of Contents
Advertisement
6. Configuration
6. Configuration
6.1 Hardware
6.1 Hardware
The hardware setup allows users to modify external device configurations, such as cameras, alarms
and monitors.
6.1.1 Camera
6.1.1 Camera
You can set up each camera configuration individually using the options available below.
6
Camera : Select channel to set up camera.
1
2
Camera display : It shows the picture of the selected camera. When you make adjustments to the
camera settings, you can see the changes in the picture.
3
Information : It shows all the setup information of the selected channel.
4
Attribute : Set the camera name, camera in use or disabled, apply PTZ protocol and whether the
covert camera is enabled or disabled.
Adjustment : Change the settings for the brightness, hue, contrast and saturation.
5
If you click on the "Default" button, it will return to the default settings. AGC (Auto Gain Control) is
an additional feature (automatically controls the brightness).
* Apply to : The selected channel setting value can be applied to all or just selected channels.
☞
☞
[Note]
• Picture control should not be used as the main setup point. It is only intended
for adjustment purposes. Please check the setup of the camera and monitor the
output first.
6
Linked Alarm-In : Select an alarm-in to be linked with the camera. When an event occurs in an
alarm-in, any camera linked to the alarm-in will record.
2
4
3
5
1
55
Advertisement
Table of Contents
