Audio Setup - Ganz digimaster DR-4FX1 Operation Manual

System Setting

Audio Setup

Choose whether to receive the live sound source and select an audio channel.
1. From <SYSTEM SETUP> - <AUDIO>, select <AUDIO>.
2. Use the [▲▼◀▶/ENTER] buttons on the remote
control or use the mouse to select an item that
you want to edit.
>DEFAULT LIVE AUDIO CHANNEL : select an
Audio channel to monitor on the live screen.
>NETWORK AUDIO TRANSMISSION : decide if
DVR transfers the audio signal to the remote client.
DVR  PC(Remote client)
>RECEIVE NETWORK AUDIO : decide if DVR
receives the audio signal from the remote client.
PC(Remote client)  DVR
3. To apply the change, click <APPLY>button.
4. When done, press the [EXIT] button on the remote control or click <CLOSE> button.
The confirmation message appears and you will return to the previous menu.
Buzzer output
You can set to output the buzzer if you manipulate the remote control.
1. From <SYSTEM SETUP> - <AUDIO>, select
<BUZZER>.
2. Use the [▲▼◀▶/ENTER] buttons on the remote
control or use the mouse to select an item that you
want to edit.
> REMOTE CONTROL : specify the output of a beep
when you press a button on the remote control.
3. To apply the change, click <APPLY> button/
4. When done, press the [EXIT] button on the remote control or click <CLOSE> button.
The confirmation message appears and you will return to the previous menu.
２４