Ganz digimaster DR-4FX1 Operation Manual page 29

>PASSWORD : Provide the password of the sender.
>TEST EMAIL ADDRESS : Enter an email address for the test purpose.
>TEST : Send a test email and check if the test email is delivered normally.
3. To apply the change, click <APPLY> in the bottom of the screen.
4. When done, press the [EXIT] button on the remote control or click <CLOSE> in the lower
screen. The confirmation message appears and you will return to the previous menu.
Network Status
From the network map screen, you can check the internet connection status and camera connection
status, and Check also the details of the connection status for each camera.
1. From <SYSTEM SETUP> - <NETWORK>, select <NETWORK STATUS>.
2. When done, press the [EXIT] button on the
remote control or click <CLOSE> button.
The confirmation message appears and you will
return to the previous menu.
Network status
> IP ADDRRESS : Indicates the internal IP address
of the DVR.
> MAC ADDRESS: Indicates the internal MAC
address of the DVR.
>DDNS ADDRESS: Indicates the internal DDNS address of the DVR.
>RTSP SERVICE PORT : Indicates the network port of the video service.
For remote service, the router must have set up the port forwarding.
>WEB SERVICE PORT : Indicates the web service network port.
For the remote service to be enabled, the corresponding port of the router should have set
up the port forwarding.
>DDNS UPDATE STATUS : Shows if the DDNS address was registered to the DDNS server
normally. Press <
>EXTERNAL IP ADDRESS : Indicate the IP address for the internet, accessible from the DVR.
The DVR can be granted access with the web browser at http://<External IP Address>:<Web
Service Port>. The IP address can vary in a dynamic IP environment.
>CONNECTED CLIENTS :Shows the list of clients that are currently connected.
Press < > to terminate the connection of an unwanted client forcibly.

Termination is limited to only users in a lower group than the current user.
> to try to register the DDNS address forcibly.
System Setting
２９