Ganz digimaster DR-4FX1 Operation Manual page 20

System Setting
Monitor
If you change from monitoring mode to sequence, you will have to set the interval of the sequence.
1. From <SYSTEM SETUP> - <DISPLAY>, select
<MONITOR>.
2. Use the [▲▼◀▶/ENTER] buttons on the remote
control or use the mouse to set dwell for sequence
mode and SPOT Out dwell.
> SEQUENCE DWELL : Sets the time interval to
the next screen mode for Live monitoring, which
defines individual screen mode s dwell time in the
Sequence. (Can set to 1 sec ~ 60 sec)
> SPOT DWELL : Sets the time interval to the next
view type, which defines individual view type's dwell time for SPOT OUT. (Can set to 1 ~ 60sec)
> VIDEO ASPECT RATIO : Set aspect ratio for Live View image ( 16:9 / 4:3 ).
> DISPLAY RESOLUTION: Set monitor output resolution.
(Auto / 1920x1080 /1280x720 / 1280x1024)
3. To apply the change, click <APPLY> button.
4. When done, press the [EXIT] button on the remote control or click <CLOSE> button.
The confirmation message appears and you will return to the previous menu.
Sequence
Select a split mode for the sequence, and also select a list of active items when the sequence is
performed.
1. From <SYSTEM SETUP> - <DISPLAY>, select
<SEQUENCE>.
2. Use the [▲▼◀▶/ENTER] buttons on the remote
control or use the mouse to add a sequence or
change the settings of the existing sequence.
>ACTIVATION : Select a list that you want to
activate the sequence for.
Only one list will become active.
>ADD : add a sequence.
3. To apply the change, click <APPLY> button.
4. When done, press the [EXIT] button on the remote control or click <CLOSE>button.
The confirmation message appears and you will return to the previous menu.
To add a sequence
1. Click <ADD> in the bottom of the screen.
2. When the "ADD" dialog appears, enter a title using
the virtual keyboard.
3. Enter the name of the sequence and click <ADD>.
4. When the <ADD VIEW TYPE> dialog appears,
click <ADD>.
２０