Samson Series 3730 Mounting And Operating Instructions page 60

Start-up – Settings
Select the initialization mode:
® Code 6
Turn
, Code 6 blinks
Press
® SUb
Turn
to confirm the SUb as the initializa-
Press
tion mode.
Enter the direction of action:
® Code 7
Turn
, Code 7 blinks
Press
Turn ® Direction of action (ää or äæ)
Press .
Deactivate travel limit:
Turn ® Code 11
, Code 11 blinks
Press
® No
Turn
Press .
60
EB 8384-2 EN
Initialization mode
Default MAX
Default ää
Default 100.0
Change pressure limit and control parame-
ters:
Note: Do not change the pressure limit
(Code 16). Only change the control param-
eters K (Code 17) and T
P
settings of the replaced positioner are
known.
® Code 16/17/18
Turn
, Code 16/17/18 blinks
Press
Turn to set the control parameter se-
lected.
Press to confirm the setting.
(Code 18) if the
V
Pressure limit
Default No
KP
Default 7
TV
Default 2