Samson Series 3730 Mounting And Operating Instructions page 17

Binary input · Galvanically isolated · Switching behavior configured over software (e.g. TROVIS-VIEW, DTM)
Active switching behavior (default setting)
Connection
Electrical data
Contact Closed, R < 20 W "On" switching state (default setting)
Open, R > 400 W "Off" switching state (default setting)
Passive switching behavior
Connection
Electrical data
Voltage
For external switch (floating contact) or relay contacts
Open-circuit voltage when contact is open: max. 10 V,
pulsed DC current, peak value 100 mA and RMS value of 0.01 mA when contact
is closed
For externally applied DC voltage, reverse polarity protection
3 to 30 V, destruction limit 40 V, current draw 3.7 mA at 24 V
> 6 V "On" switching state (default setting)
< 1 V "Off" switching state (default setting)
Design and principle of operation
EB 8384-2 EN
17