Samson Series 3730 Mounting And Operating Instructions page 43

Table 6 · Attachment of external position sensor
Template for mounting the position sensor on older mounting parts. See note on page 34.
Mounting parts for actuators with 120 cm² see Fig. 14 left
Connecting plate (9, old) for Actuator
Type 3277-5xxxxxx.00
Direct attachment
Connecting plate (new) for Actuator Type 3277-5xxxxxx.01 (new)
Mounting parts for actuators with 240, 350, 355 and 700 cm², see Fig. 14
right
NAMUR attachmt. Mounting parts for attachment to NAMUR rib w. lever L and XL, see Fig. 15
Micro-flow valve Mounting parts for Type 3510 Micro-flow Valve, see Fig. 16
VDI/VDE 3845 (September 2010), refer to section 16.1 for details
Attachment to
rotary actuators
SAMSON Type 3278 with 160 cm² (also for VETEC Type S160 and Type R),
heavy-duty version
SAMSON Type 3278 with 320 cm² and for VETEC Type S320, heavy-duty
version
Connecting plate (6)
Pressure gauge bracket (7)
Accessories for
positioner
Pressure gauge mounting kit up to max. 6 bar
(output/supply)
Bracket to mount the positioner on a wall
Note: The other fastening parts are to be provided at the site of installation as
wall foundations vary from site to site.
1)
Only new switchover and connecting plates can be used with new actuators (Index 01).
Old and new plates are not interchangeable.
Attachment to the control valve – Mounting parts and accessories
Actuator surface area corresponds to level 1
Size AA1 to AA4 with follower clamp and coupling wheel, version
with CrNiMo steel bracket, see Fig. 17
Size AA1 to AA4, heavy-duty version
Size AA5, heavy-duty version (e.g. Air Torque 10 000)
Bracket surface area corresponds to level 2, heavy-duty version
Order no.
1060-0784
1400-7472
1
G 1400-6820
8
1
NPT 1400-6821
8
1) 1400-6823
1400-7471
1400-7468
1400-7469
1400-7473
1400-9384
1400-9992
1400-9974
1400-9385
1400-5891
1400-9974
1
G 1400-7461
4
1
NPT 1400-7462
4
1
G 1400-7458
4
1
NPT 1400-7459
4
St. steel/brass 1400-6950
St. steel/st. steel 1400-6951
0309-0111
EB 8384-2 EN
and
43