Samson Series 3730 Mounting And Operating Instructions page 103

5. Set the communications port for data
communication. Proceed as follows:
4
Connect the port (RS-232 or USB) of the
computer using the corresponding
adapter to the SAMSON SSP interface
of the positioner.
4
Select Communications in Options menu
to open the server settings window. Click
Server settings button.
4
Check Local connection and Auto-
matically local connect boxes and click
OK button to confirm server settings.
The Communication window reappears.
4
Click Port settings button.
4
The settings window opens and
State: not yet searched appears in the
Automatic detection field.
Click Start button.
TROVIS-VIEW has found the positioner
when State: Device found on COM ....
appears.
4
Click on OK button twice to confirm set-
tings.
6. If required, enter the type, date and
selectable parameters which are used to
automatically create the TROVIS-VIEW
file name.
The file name created in this way ap-
pears on saving a TROVIS-VIEW file
(e.g. VIEW3_3730_2.tro) and can be
adopted or altered.
Settings in TROVIS-VIEW software
103
EB 8384-2 EN