Honeywell VISTA-128BPT Installation And Setup Manual page 94

VISTA-128BPT/128BPT-SIA/250BPT INSTALLATION AND SETUP GUIDE
P
•
PIR: Abbreviation for Passive Infrared motion
detector
•
Partition: An area within a total system that
can be separately controlled as if it were an
individual system.
•
Partition Descriptor: A 4-character name that
can be programmed in some controls to
identify each partition.
•
Partition Specific: A feature option that
relates directly to a partition as opposed to the
system as a whole
•
Periodic Test Report: A report sent to central
station on a regular basis; Programmable in
some controls, but usually happens every 24
hours; UL requirements
applications; Used to verify the dialer is still
working properly even though it has not sent
any reports
•
Phone access: The ability to access and
control the security system via touch tone
phone on or off premise
•
Phone Code: A 2-digit code required to access
the security system via touch tone phone.
•
Polling loop: A 2-wire loop used to support
multiplex devices on some controls; *see also
multiplex Loop and V-PLEX®
•
Program Field:
programming
•
Program Mode: The mode through which the
installer programs the security system from
the keypad
•
Pull Station: A device that allows a manual
initiation of a fire alarm, such as the 5140MPS
Q
•
Quick-Arm: The option to use the [#] key in
place of the 4-digit code when turn the system
on (arming); Can be used to arm away, stay,
instant, and maximum. The 4-digit code is
required to disarm the system.
•
Quick Bypass: Some controls have the option
to bypass all faulted zones by pressing the
[Bypass] key + [#] key at the keypad.
R
•
Real Time Clock (RTC): a built-in clock that
keeps real time, for test reports, scheduling,
and output timers; the time and date may be
set via the keypad
•
Relay: A mechanical device or switch used to
transfer power, or to create an open or short in
a circuit
•
Relay Module: An addressable module used
on some controls; 4204, 4229, or 4101SN
in commercial
A specific address
•
Relay
programmable Relay Outputs; these can be
4204, 4229, or 4101SN
•
Report Code: The alpha-numeric report that is
transmitted to the central station receiver to
identify the events that have occurred
•
Report Format: The Language in which an
alarm report is set to the central station
•
Restricted Output: Relay Outputs may be
restricted to from end-user control
•
RF: Abbreviation for Radio Frequency, wireless
•
RTC: Abbreviation for Real Time Clock
S
•
Scheduling: The general term used for
programming something to happen on a
preset
Schedules, Auto-Arming, Limited Access, and
Relay Output Control.
•
Security Code: a.k.a. user code; access code;
Always 4 digits
•
Serial Programming: * See Learn Mode
•
Siren: A sounding device that consists of a
speaker with a built-in siren driver
•
Siren Driver: A device that sends electrical
(Audio) signal to a speaker
•
Sniffer Mode: Installer test modes used with
in
wireless systems to determine if any other
systems are operating in the immediate area,
or to test reception of local transmitters.
•
Speaker (Loudspeaker): A sounding device
that consists of a paper cone and a magnetic
coil through witch electrical signals are output
as audible sounds
•
Split Reporting: To send specific reports to
one central station or receiver and other
reports to a second central station or receiver
•
Standard Zones: Zones that are available "out
of the box"; zones that do not require the
addition of expansion modules.
•
Stay Mode: One of the arming modes; When
armed stay, all perimeter zones are protected
and all interior zones are bypassed
•
Strobe/Strobe light: A high intensity light that
flashes at a constant rate; rated in candle
power or candela
•
Subscriber Account Number: The 3-, 4-, or
10-digit number used by the central station to
identify the particular account; this number is
programmed into the control by the installer.
•
System Wide: In partitioned systems this
pertains to features and options that affect
the system as a whole as opposed to only one
partition (*see also partition specific)
10-4
Output: Some controls
schedule, such as
support
Open/Close