Manual Voice Vlan Assignment Mode Configuration Example - H3C S3600V2 SERIES Layer 2-Lan Switching Configuration Manual

[DeviceA-Ethernet1/0/2] voice vlan mode auto
[DeviceA-Ethernet1/0/2] voice vlan 3 enable
Verifying the configurations
# Display the OUI addresses, OUI address masks, and description strings.
<DeviceA> display voice vlan oui
Oui Address
0001-e300-0000
0003-6b00-0000
0004-0d00-0000
0011-1100-0000
0011-2200-0000
0060-b900-0000
00d0-1e00-0000
00e0-7500-0000
00e0-bb00-0000
# Display the states of voice VLANs.
<DeviceA> display voice vlan state
Maximum of Voice VLANs: 128
Current Voice VLANs: 2
Voice VLAN security mode: Security
Voice VLAN aging time: 30 minutes
Voice VLAN enabled port and its mode:
PORT
--------------------------------------------------------------------
Ethernet1/0/1
Ethernet1/0/2

Manual voice VLAN assignment mode configuration example

Network requirements
As shown in
Create VLAN 2 and configure it as a voice VLAN that permits only voice traffic to pass through.
•
The IP phones send untagged voice traffic. Configure Ethernet 1/0/1 as a hybrid port.
•
Configure Ethernet 1/0/1 to operate in manual voice VLAN assignment mode. Configure Ethernet
•
1/0/1 to allow voice traffic with an OUI address of 001 1-2200-0000, a mask of ffff-ff00-0000,
and a description string of test to be forwarded in the voice VLAN.
Mask
ffff-ff00-0000
ffff-ff00-0000
ffff-ff00-0000
ffff-ff00-0000
ffff-ff00-0000
ffff-ff00-0000
ffff-ff00-0000
ffff-ff00-0000
ffff-ff00-0000
VLAN
2
3
Figure 56,
Description
Siemens phone
Cisco phone
Avaya phone
IP phone A
IP phone B
Philips/NEC phone
Pingtel phone
Polycom phone
3com phone
MODE COS
AUTO 6
AUTO 6
168
DSCP
46
46