H3C S3100-52P Command Manual
Vlan-vpn
Hide thumbs
Also See for S3100-52P:
- Operation manual (955 pages) ,
- Command manual (55 pages) ,
- Installation manual (54 pages)
Table of Contents
Advertisement
Quick Links
Command Manual - VLAN-VPN
H3C S3100-52P Ethernet Switch
Chapter 1 VLAN-VPN Configuration Commands ....................................................................... 1-1
1.1 VLAN-VPN Configuration Commands ............................................................................... 1-1
1.1.1 display port vlan-vpn ............................................................................................... 1-1
1.1.2 vlan-vpn enable ....................................................................................................... 1-2
1.1.3 vlan-vpn inner-cos-trust........................................................................................... 1-3
1.1.4 vlan-vpn priority ....................................................................................................... 1-3
1.1.5 vlan-vpn tpid ............................................................................................................ 1-5
Chapter 2 Selective QinQ Configuration Commands ................................................................ 2-1
2.1 Selective QinQ Configuration Commands......................................................................... 2-1
2.1.1 mac-address-mapping ............................................................................................ 2-1
2.1.2 raw-vlan-id inbound................................................................................................. 2-2
2.1.3 vlan-vpn vid ............................................................................................................. 2-3
Chapter 3 BPDU Tunnel Configuration Commands .................................................................. 3-1
3.1 BPDU Tunnel Configuration Commands........................................................................... 3-1
3.1.1 bpdu-tunnel ............................................................................................................. 3-1
3.1.2 bpdu-tunnel tunnel-dmac ........................................................................................ 3-3
3.1.3 display bpdu-tunnel ................................................................................................. 3-4
Table of Contents
i
Table of Contents
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for H3C S3100-52P
Summary of Contents for H3C S3100-52P
-
Page 1: Table Of Contents
Command Manual – VLAN-VPN H3C S3100-52P Ethernet Switch Table of Contents Table of Contents Chapter 1 VLAN-VPN Configuration Commands ............... 1-1 1.1 VLAN-VPN Configuration Commands ................1-1 1.1.1 display port vlan-vpn ....................1-1 1.1.2 vlan-vpn enable ....................... 1-2 1.1.3 vlan-vpn inner-cos-trust................... 1-3 1.1.4 vlan-vpn priority ....................... -
Page 2: Chapter 1 Vlan-Vpn Configuration Commands
Command Manual – VLAN-VPN H3C S3100-52P Ethernet Switch Chapter 1 VLAN-VPN Configuration Commands Chapter 1 VLAN-VPN Configuration Commands 1.1 VLAN-VPN Configuration Commands 1.1.1 display port vlan-vpn Syntax display port vlan-vpn View Any view Parameters None Description Use the display port vlan-vpn command to display the information about VLAN-VPN configuration of the current system. -
Page 3: Vlan-Vpn Enable
Command Manual – VLAN-VPN H3C S3100-52P Ethernet Switch Chapter 1 VLAN-VPN Configuration Commands Field Description The status of the inner-to-outer tag priority replicating feature, enable (enabled) or disable (disabled). VLAN-VPN inner-cos-trust You can use the vlan-vpn inner-cos-trust command to configure the feature. -
Page 4: Vlan-Vpn Inner-Cos-Trust
Command Manual – VLAN-VPN H3C S3100-52P Ethernet Switch Chapter 1 VLAN-VPN Configuration Commands System View: return to User View with Ctrl+Z. [Sysname] interface Ethernet 1/0/1 [Sysname-Ethernet1/0/1] vlan-vpn enable 1.1.3 vlan-vpn inner-cos-trust Syntax vlan-vpn inner-cos-trust enable undo vlan-vpn inner-cos-trust View Ethernet port view... - Page 5 Command Manual – VLAN-VPN H3C S3100-52P Ethernet Switch Chapter 1 VLAN-VPN Configuration Commands undo vlan-vpn priority inner-priority View Ethernet port view Parameters inner-priority: 802.1p priority of the inner VLAN tag in a packet. This argument can be in the range 0 to 7 or a keyword listed in Table 1-2.
-
Page 6: Vlan-Vpn Tpid
Command Manual – VLAN-VPN H3C S3100-52P Ethernet Switch Chapter 1 VLAN-VPN Configuration Commands Note that: This command is applicable to only the VLAN-VPN enabled ports. This command is mutually exclusive with the vlan-vpn inner-cos-trust command. Examples # Enable the inner-to-outer tag priority mapping feature for Ethernet 1/0/1. Insert outer tags with the priorities being 5 to packets with the priorities of their inner tags being 3. - Page 7 Command Manual – VLAN-VPN H3C S3100-52P Ethernet Switch Chapter 1 VLAN-VPN Configuration Commands Table 1-3 Common Ethernet frame protocol type values Protocol type Value 0x0806 0x0800 MPLS 0x8847/0x8848 0x8137 IS-IS 0x8000 LACP 0x8809 802.1x 0x888E Note: Besides the default TPID value, you can configure only one TPID value on an S3100-52P switch.
-
Page 8: Chapter 2 Selective Qinq Configuration Commands
Command Manual – VLAN-VPN H3C S3100-52P Ethernet Switch Chapter 2 Selective QinQ Configuration Commands Chapter 2 Selective QinQ Configuration Commands Note: The selective QinQ feature is new to H3C S3100-52P Ethernet Switch. 2.1 Selective QinQ Configuration Commands 2.1.1 mac-address-mapping Syntax mac-address-mapping index... -
Page 9: Raw-Vlan-Id Inbound
Command Manual – VLAN-VPN H3C S3100-52P Ethernet Switch Chapter 2 Selective QinQ Configuration Commands MAC address tables of specified source VLANs to the MAC address table of the specified destination VLAN. Use the undo mac-address-mapping command to disable this feature. -
Page 10: Vlan-Vpn Vid
Command Manual – VLAN-VPN H3C S3100-52P Ethernet Switch Chapter 2 Selective QinQ Configuration Commands all: Removes all configurations of encapsulating an outer VLAN tag for specified inner VLANs in the current view. Description Use the raw-vlan-id inbound command to specify to encapsulate packets with the specified inner VLAN tags with the specified outer tag. - Page 11 Command Manual – VLAN-VPN H3C S3100-52P Ethernet Switch Chapter 2 Selective QinQ Configuration Commands Parameters vlan-id: VLAN ID, in the range 1 to 4094. Description Use the vlan-vpn vid command to configure the outer VLAN tag for a selective QinQ policy (that is, the outer VLAN tag to be used by a port to encapsulate received packets) and to enter QinQ view.
-
Page 12: Chapter 3 Bpdu Tunnel Configuration Commands
Command Manual – VLAN-VPN H3C S3100-52P Ethernet Switch Chapter 3 BPDU Tunnel Configuration Commands Chapter 3 BPDU Tunnel Configuration Commands Note: Two features, the BPDU Tunnel support for packets of multiple protocols and adjusting tunnel packet MAC addresses, are newly added. For details, refer to... - Page 13 Command Manual – VLAN-VPN H3C S3100-52P Ethernet Switch Chapter 3 BPDU Tunnel Configuration Commands Value Description Enable/Disable BPDU tunnel for per-VLAN spanning tree pvst (PVST). Enable/Disable BPDU tunnel for spanning tree protocol (STP). Enable/Disable BPDU tunnel for VLAN trunk protocol (VTP).
-
Page 14: Bpdu-Tunnel Tunnel-Dmac
Command Manual – VLAN-VPN H3C S3100-52P Ethernet Switch Chapter 3 BPDU Tunnel Configuration Commands <Sysname> system-view System View: return to User View with Ctrl+Z. [Sysname] interface Ethernet 1/0/1 [Sysname-Ethernet1/0/1] bpdu-tunnel lacp 3.1.2 bpdu-tunnel tunnel-dmac Syntax bpdu-tunnel tunnel-dmac mac-address undo bpdu-tunnel tunnel-dmac... -
Page 15: Display Bpdu-Tunnel
Command Manual – VLAN-VPN H3C S3100-52P Ethernet Switch Chapter 3 BPDU Tunnel Configuration Commands Examples # Set the destination MAC address for protocol packets transmitted along BPDU tunnels to 010f-e266-c3ab. <Sysname> system-view System View: return to User View with Ctrl+Z.
Need help?
Do you have a question about the S3100-52P and is the answer not in the manual?
Questions and answers