H3C S3600V2 SERIES Layer 2-Lan Switching Configuration Manual page 149

[DeviceA-vlan100] quit
[DeviceA] vlan 200
[DeviceA-vlan200] quit
# Associate the MAC address of Laptop 1 with VLAN 100, and associate the MAC address of
Laptop 2 with VLAN 200.
[DeviceA] mac-vlan mac-address 000d-88f8-4e71 vlan 100
[DeviceA] mac-vlan mac-address 0014-222c-aa69 vlan 200
# Configure Laptop 1 and Laptop 2 to access the network through Ethernet 1/0/1. Configure
Ethernet 1/0/1 as a hybrid port that sends packets of VLANs 100 and 200 untagged, and enable
the MAC-based VLAN feature on it.
[DeviceA] interface ethernet 1/0/1
[DeviceA-Ethernet1/0/1] port link-type hybrid
[DeviceA-Ethernet1/0/1] port hybrid vlan 100 200 untagged
Please wait... Done.
[DeviceA-Ethernet1/0/1] mac-vlan enable
[DeviceA-Ethernet1/0/1] quit
# To enable the laptops to access Server 1 and Server 2, configure the uplink port Ethernet 1/0/2
as a trunk port, and assign it to VLANs 100 and 200.
[DeviceA] interface ethernet 1/0/2
[DeviceA-Ethernet1/0/2] port link-type trunk
[DeviceA-Ethernet1/0/2] port trunk permit vlan 100 200
[DeviceA-Ethernet1/0/2] quit
Configure Device B:
2.
# Create VLANs 100 and 200. Assign Ethernet 1/0/13 to VLAN 100, and assign Ethernet
1/0/14 to VLAN 200.
<DeviceB> system-view
[DeviceB] vlan 100
[DeviceB-vlan100] port ethernet 1/0/13
[DeviceB-vlan100] quit
[DeviceB] vlan 200
[DeviceB-vlan200] port ethernet 1/0/14
[DeviceB-vlan200] quit
# Configure Ethernet 1/0/3 and Ethernet 1/0/4 as trunk ports, and assign them to VLANs 100
and 200.
[DeviceB] interface ethernet 1/0/3
[DeviceB-Ethernet1/0/3] port link-type trunk
[DeviceB-Ethernet1/0/3] port trunk permit vlan 100 200
[DeviceB-Ethernet1/0/3] quit
[DeviceB] interface ethernet 1/0/4
[DeviceB-Ethernet1/0/4] port link-type trunk
[DeviceB-Ethernet1/0/4] port trunk permit vlan 100 200
[DeviceB-Ethernet1/0/4] quit
Configure Device C as you configure Device A.
3.
Verifying the configuration
Laptop 1 can access Server 1 only, and Laptop 2 can access Server 2 only.
1.
134