H3C S3600V2 SERIES Layer 2-Lan Switching Configuration Manual page 4

Configuration guide
MAC Information
Ethernet link aggregation
Port Isolation
Spanning tree
BPDU tunneling
VLAN
Super VLAN
Isolate-user-VLAN
Voice VLAN
GVRP
QinQ
VLAN mapping
LLDP
Service loopback group
MVRP
Conventions
This section describes the conventions used in this documentation set.
Command conventions
Convention
Boldface
Italic
[ ]
{ x | y | ... }
[ x | y | ... ]
Added and modified features
address
•
Enabling MAC address migration log notifying
N/A
New feature: Configuring the maximum number of Selected ports
allowed in an aggregation group
N/A
N/A
N/A
N/A
N/A
N/A
New features:
•
Enabling LLDP to automatically discover IP phones
•
Configuring LLDP to advertise a specific voice VLAN
•
Dynamically advertising server-assigned VLANs through LLDP
Modified feature: The number of OUI addresses that can be configured
for the voice VLAN feature was changed from 16 to 128.
N/A
N/A
N/A
Modified feature: For the LLDP-compatible CDP features, the Addresses,
Capabilities, Software Version, Platform, Duplex, MTU, and System
Name fields were added to the CDP packets sent by the switch.
N/A
MVRP is a newly added feature.
Description
Bold text represents commands and keywords that you enter literally as shown.
Italic text represents arguments that you replace with actual values.
Square brackets enclose syntax choices (keywords or arguments) that are optional.
Braces enclose a set of required syntax choices separated by vertical bars, from which
you select one.
Square brackets enclose a set of optional syntax choices separated by vertical bars, from
which you select one or none.