Mac-Based Vlan Configuration Example - H3C S3600V2 SERIES Layer 2-Lan Switching Configuration Manual

MAC-based VLAN configuration example

Network requirements
As shown in
Ethernet 1/0/1 of Device A and Device C are each connected to a meeting room. Laptop 1 and
•
Laptop 2 are used for meetings and might be used in either of the two meeting rooms.
Different departments own Laptop 1 and Laptop 2. The two departments use VLAN 100 and VLAN
•
200, respectively. Each laptop must be able to access only its own department server, no matter
which meeting room it is used in.
• The MAC address of Laptop 1 is 000D-88F8-4E71, and that of Laptop 2 is 0014-222C-AA69.
Figure 44 Network diagram
VLAN 100
IP: 1.1.1.1/24
Eth1/0/2
Device A
Eth1/0/1
VLAN 100
Laptop1
IP: 1.1.1.2/24
MAC: 000d-88f8-4e71
Configuration consideration
Create VLANs 100 and 200.
•
Configure the uplink ports of Device A and Device C as trunk ports, and assign them to VLANs 100
•
and 200.
• Configure the downlink ports of Device B as trunk ports, and assign them to VLANs 100 and 200.
Assign the uplink ports of Device B to VLANs 100 and 200.
Associate the MAC address of Laptop 1 with VLAN 100, and associate the MAC address of Laptop
•
2 with VLAN 200.
Configuration procedure
Configure Device A:
1.
# Create VLANs 100 and 200.
<DeviceA> system-view
[DeviceA] vlan 100
Figure 44:
Server1
Server2
IP: 1.1.2.1/24
Eth1/0/14
Eth1/0/13
Eth1/0/4
Eth1/0/3
Device B
Laptop2
IP: 1.1.2.2/24
MAC: 0014-222c-aa69
VLAN 200
Eth1/0/2
Device C
Eth1/0/1
VLAN 200
133