H3C S3600V2 SERIES Layer 2-Lan Switching Configuration Manual page 3

Preface
The H3C S3600V2 documentation set includes 10 configuration guides, which describe the software
features for the H3C S3600V2 Switch Series Release 2108, and guide you through the software
configuration procedures. These configuration guides also provide configuration examples to help you
apply software features to different network scenarios.
The Layer 2—LAN Switching Configuration Guide describes LAN switching fundamentals and
configuration. It describes how to implement flow control and load sharing, isolate uses in the same
VLAN, eliminate Layer 2 loops, divide VLANs, transmit customer network packets through the public
network, and modify VLAN tags for packets.
This preface includes:
Audience
•
Added and modified features
•
Conventions
•
• About the H3C S3600V2 documentation set
Obtaining documentation
•
Technical support
•
Documentation feedback
•
Audience
This documentation is intended for:
Network planners
•
Field technical support and servicing engineers
•
Network administrators working with the S3600V2 series
•
Added and modified features
Compared to Release 2101, Release 2108 adds and modifies the following features:
Configuration guide
Ethernet interface
Loopback and null interface
Bulk interface configuration
MAC address table
Added and modified features
N/A
N/A
Bulk interface configuration is a newly added feature
New features:
•
Disabling MAC entry aging timer refresh based on destination MAC