Allen-Bradley PowerFlex 755T Installation Instructions Manual page 98

Chapter 4 Mechanical and Electrical Installation
98
3. Connect the each fiber-optic cable to its designated CTL port on the
power module power layer interface circuit board. See
page
Figure 50 - Fiber Interface to CTL Port Connections
L0-CTL and L1-CTL connections
are made at the factory.
Rockwell Automation Publication 750-IN100B-EN-P - July 2017
74.
Shipping Splits
L2-CTL...L4-CTL Connections
Figure 38 on
M0-CTL...M4-CTL Connections