Allen-Bradley PowerFlex 755T Installation Instructions Manual page 103

1
2
3
4
5
Item Name Description
1 AC Bus AC power supply
2 DC Bus DC+, DC-
3 Testpoints DC+, DC- and R/L1, S/L2, T/L3 voltage testpoint sockets
4 Power Bus R/L1, S/L2, T/L3 AC line input power connections
Figure 53 - Frames 10...12 Drives
5
PE
Frame 10 drive shown. Layout is typical for Frames 10...12.
1
2
4
Rockwell Automation Publication 750-IN100B-EN-P - July 2017
PE PE
Item Name Description
5 Control Bus 120/240V and 24V AC control power supply connections
6 Power Bus U/T1, V/T2, W/T3 motor connections
7 PE Grounding Terminating point to chassis ground for incoming AC line and
Bar motor shield.
PE ground bar clamps, kit number SK-RM-GRNDCLMP-nn, are
available.
8 Nameplate Power module and LCL filter module nameplate locations
Power Wiring Chapter 5
6
PE
7
3
8
103