Allen-Bradley PowerFlex 755T Installation Instructions Manual page 91

Top Bracket Sets
Paint-piercing rubber washer.
1
Frame Clamps
2
Install Joining Hardware
Use the joining hardware provided to mechanically connect the enclosures
together. Nine frame clamps and two top bracket sets are provided.
1. Install the top bracket sets to the cabinets.
Ensure that the cabinets are aligned, level, and pushed together tightly.
2. Install the bolts that join the two angle brackets and tighten.
3. Install the frame clamps and tighten.
IMPORTANT Do not attempt to lift enclosures joined with this hardware.
Rockwell Automation Publication 750-IN100B-EN-P - July 2017
Mechanical and Electrical Installation
Enclosure door omitted for clarity.
Chapter 4
91