Allen-Bradley PowerFlex 755T Installation Instructions Manual page 88

Chapter 4 Mechanical and Electrical Installation
88
2. Apply the gasket in one continuous strip around the mating surface of
the enclosure. Seam the gasket at the approximate middle of the bottom
of the enclosure.
3. Align the right enclosure assembly (section 2 of n) with the input bay
assembly (section 1 of n) and bring together with the placed input bay.
4. Bring the aligned enclosures together.
Rockwell Automation Publication 750-IN100B-EN-P - July 2017
Seam Location