Allen-Bradley PowerFlex 755T Installation Instructions Manual page 105

Figure 55 - Frames 8...12 Common Bus Inverters
2
3
4
Frame 8 Frame 10 (Layout is typical for Frames 9...12)
Item Name
1 DC bus
2 Control bus
3 Power bus
4 PE grounding bar
5 Testpoints
6 Nameplate
Rockwell Automation Publication 750-IN100B-EN-P - July 2017
5
6
PE
Description
DC power supply
Control power supply
U/T1, V/T2, W/T3 motor connections
Terminating point to chassis ground for incoming AC line and motor shield.
PE ground bar clamps, kit number SK-RM-GRNDCLMP-nn, are available.
DC+, DC- and R/L1, S/L2, T/L3 voltage testpoint sockets
Power module and LCL filter module nameplate locations
Power Wiring Chapter 5
105