Allen-Bradley PowerFlex 755T Installation Instructions Manual page 61

PowerFlex 755TL and 755TR Drives
This section lists the LCL filter modules, line side converters, and motor side
inverters that you must remove to install the product. Removal of these
components facilitates access to join and anchor cabinets, and for making
electrical interconnections between the cabinets. For instructions on how to
remove these components from the enclosure, see Remove Power Module on
page 73
IMPORTANT Each module is marked with its unique position number the cabinet. Always
Figure 18 - LCL Filter Module and Power Module Position Labels
Frame 8 Drive - LCL Filter and Power Modules Shown
LCL Filter Module
IMPORTANT The fiber-optic cables are marked to identify the module that they
Rockwell Automation Publication 750-IN100B-EN-P - July 2017
and Remove LCL Filter Module on page 79.
return a module to the position specified.
LCL0 Label on Control Bus Assembly
LCL0 Label on LCL Filter Module
Line Side Converter Motor Side Inverter
Power Module Power Module
correspond with.
Mechanical and Electrical Installation
L0 Label on Control Bus Assembly
L0 Label on Line Side Power Module
Control Bus Assembly
M0 Label on Control Bus Assembly
M0 Label on Motor Side Power Module
Chapter 4
61