Allen-Bradley PowerFlex 755T Installation Instructions Manual page 38

Chapter 3 Prepare for Installation
38
Anchor Bolt System
Enclosures can be mounted directly to a level concrete surface by using M10
(0.375 in.) anchor bolts.
The enclosures must be secured to the anchor bolts in all four corners by using
M10 nuts and lock washers.
Figure 14 - Anchor Bolt System Cross-section
44 mm
(1.73 in.)
M10
(0.38 in.)
Concrete Screw System
Enclosures can be mounted directly to a level concrete surface by using M10
(0.375 in.) concrete screws.
The enclosures must be secured by the concrete screws in all four corners.
Figure 15 - Concrete Screw System Cross-section
44 mm
(1.73 in.)
M10
(0.375 in.)
Rockwell Automation Publication 750-IN100B-EN-P - July 2017