Node Status - Network Settings Pane; Figure 2-5. Blade Status Page - Blade Ipmi Network Pane; Table 2-4. Blade Status Page - Network Settings Pane Controls - Supermicro MicroBlade User Manual

Node Status – Network Settings Pane
Clicking on the N
(Figure 2-5) with controls that are listed and described in
Figure 2-5. Blade Status Page – Blade IPMI Network Pane
Table 2-4. Blade Status Page – Network Settings Pane Controls
Item Name
1 Hostname Field
2 IPv4 Settings
3 IPv6 Settings
4 VLAN Enable/Disable These option buttons allow you to enable or disable VLAN.
5 RMCP Port Field
6 Save Button
C link brings up a Blade IPMI N
ETWORK ONFIG
6
Description
Enter a host name in this field if desired.
The IPv4 settings can be configured with these controls when you select
the U F
SE THE
The IPv6 settings can be configured using these controls.
The port setting for RMCP can be entered in the field provided here.
Pressing the S
or blade module.
1
2
3
4
5
IP A
OLLOWING DDRESS
button saves the configuration for the selected node
AVE
2-7
Chapter 2: Blade System
pane
ETWORK
Table 2-4.
( S M ) option button.
USE TATIC ODE