Radius Page; Figure 4-9. Radius Page; Table 4-5. Radius Page Controls - Supermicro MicroBlade User Manual

4-5

RADIUS Page

Click on RADIUS to reveal the RADIUS page
enable RADIUS and enter the required information to access the RADIUS server. The
commands you may give on this page, are described below in
1
3
Item Control Name
Enable RADIUS
1
Check Box
RADIUS Information
2
Fields
3 Save Button

Figure 4-9. RADIUS Page

2

Table 4-5. RADIUS Page Controls

Description
Check this box to enable RADIUS.
Fill out these fields to configure RADIUS.
Once you are done configuring RADIUS, press this button to save.
4-9
Chapter 4: Configuration
(Figure 4-9). You can use this page to
Table 4-5.