Blade Status Page - Supermicro MicroBlade User Manual

Web-based Management Utility User's Manual
2-2

Blade Status Page

The B S
LADE TATUS
modules in the system and displays information in columns of a table including Blade,
Name, Model, Power Status, Maximum Power, KVM, UID, Error, BMC IP, BMC Version,
Power Fail Policy and AC Lost Policy
Function buttons at the top of the table include Power On/Off, Power Cycle, Power
Reset, Graceful Shutdown, AC cycle, Power Fail Policy, AC Lost Policy and Refresh of
the blade module. Selecting a blade module or node from the blade table, and then
pushing a function button at the top of the table changes the status and functions of the
blade module. There are also control buttons and drop-down list box controls within the
table for changing status on a blade module as well.
The command functions on the page and in some of the columns allow you to perform
various functions, as shown in
To perform a function, first click the box(es) next to the blade(s) or node(s) you wish to
issue a command to and then click the command button on top of the table. You can
also click on any of the individual nodes listed to bring up additional pages with details
about that particular node's status, and the controls for setting them (see
Page" on page
1
page allows you to check and set up the status of all the blade
Figure 2-2
2-4).
Figure 2-2. Blade Status Page
2 3 4
11
and described in
5 6 7 8
12 13
2-2
Table 2-1.
"Node Status
10
9
14 15 16