System Event Log Page; Table 3-2. System Event Log Page Controls - Supermicro MicroBlade User Manual

3-2

System Event Log Page

The S E
YSTEM VENT
clear the contents of the system event log for a remote system. The S
page that appears
1
Item Name
Module Selection
1
Drop-down List Box
Module Number
2 Selection Drop-down
List Box
Event Type Selection
3
Drop-down List Box
4 Apply Button
Clear Event Log
5
Button
Download Event Log
6
Button
Event Log Advanced
7
Settings Link
L option in the S
OG
(Figure 3-2) and its controls
Figure 3-2. System Event Log Page
7
2 3
5 6

Table 3-2. System Event Log Page Controls

Description
Select from here the module type whose event you wish to view. Options
include: CMM or Blade.
Select the specific module of the type you selected in the M
S list whose event you wish to view.
ELECTION
Select the specific event type whose event you wish to view. Options
include All Events, Sensor Specific Events, BIOS Specific Events or
System Management Software Events.
When you have selected your options from all the above drop-down list
boxes, press the A
Press this button to clear the event log of all entries.
Press this button to download the event log.
Press this link to go the Event Log Advanced Settings page
This page has a check box to E
buttons to S
H
YSTEM EALTH
(Table
button to apply your changes.
PPLY
NABLE THE
or C this configuration.
AVE ANCEL
3-3
Chapter 3: System Health
submenu allows you to view and
YSTEM
3-2) are shown below.
AC P E
OWER VENT
E L
VENT OG
ODULE
(Figure 3-3).
L and
OG