Main Menu Buttons; Chapter 2 Blade System; Table 1-2. Home Page Elements And Controls; Table 1-3. Main Menu Buttons - Supermicro MicroBlade User Manual

Item Name
1 Host Identification
2 Page Controls
3 Menu Bar
4 Menu List Pane
5 Control Pane
6 Help Display Box

Main Menu Buttons

The buttons below in
Management Utility. Clicking on an button will reveal a menu of related functions that
you can select. Clicking on a button will bring up a summary page for that menu with all
the menu items shown in the right pane of the page. These you click on to go their
pages.
Menu Buttons Description
Blade System These pages contains general information about the blade system.
These pages shows you data related to the server's health, such as sensor readings
System Health
and the event log.
Configuration Use these pages to configure various settings, such as alerts, users, or network etc.
These pages allows you to perform various remote operations on the server, such
Remote Control
as launching the remote console.
Use these pages to maintain the IPMI device, such as update firmware or reset the
Maintenance
IPMI device.
Help This button toggles on or off the H

Table 1-2. Home Page Elements and Controls

Description
This displays the host identification information including host server IP
address and user ID.
Control links for page refresh and logout are found here in the upper right
corner of the page. Additionally, there is a L
selecting the language used.
This menu bar contains control buttons for the MicroBlade Web-based
Management Utility's menus. Clicking on a button brings up the summary
page for that menu, plus the menu items listed in the M
left. Also placing the cursor over these buttons brings up a drop-down list of
all the menu items for that menu that allow you to select one of them.
This is a list of links for each menu item from a selected menu from the
M B . Clicking on one of these links brings up the control pane for that
ENU AR
menu item and its controls.
This pane controls for the menu item selected from the menu bar. You can
use these controls to configure and control blade modules, other equipment
or services for your MicroBlade.
This text display box contains help information for the page you have
selected. To activate help, press the H
D box.
ISPLAY
Table 1-3 cover the main functions of MicroBlade Web-based

Table 1-3. Main Menu Buttons

ANGUAGE
button to toggle on or off the H
ELP
D box on the page.
ELP ISPLAY
1-3
Chapter 1: Introduction
drop-down list box for
L Pane on the
ENU IST
ELP