Ldap Page; Figure 4-4. Ldap Page; Table 4-3. Ldap Page Controls - Supermicro MicroBlade User Manual

4-3

LDAP Page

Click on LDAP to reveal the LDAP page
the Light-Weight Directory Access Protocol (LDAP) settings. Check the box below to
enable LDAP authentication and enter the required information to access the LDAP
server. Press the Save button to save your changes. The commands you may give on
this page, are described below in
1
2
4
Item Control Name
Enable LDAP
1
Authentication
LDAP Authentication
2
over SSL
3 Configuration fields
4 Save Button
(Figure
Table 4-3.

Figure 4-4. LDAP Page

3

Table 4-3. LDAP Page Controls

Description
Use this check box to enable the controls below to configure LDAP for
your system.
Check this box to allow LDAP Authentication over SSL in your system.
Enter Port, IP Address, Bind Password, Bind DN and Searchbase in the
fields in this section to configure LDAP for your system.
Once you are done configuring LDAP, press this button to save this
information to your system.
4-5
Chapter 4: Configuration
4-4). This page allows you to configure