Snmp Page; Figure 4-14. Snmp Page; Table 4-10. Snmp Page Controls - Supermicro MicroBlade User Manual

Web-based Management Utility User's Manual

4-10 SNMP Page

Click on SNMP to reveal the SNMP page
Address for the SMTP Mail server and some of its configurations. The commands you
may give on this page, as described below in
Item Control Name
1 SNMP Settings Fields
2 Save Button
3 Add User Button
4 Modify User Button
5 Delete User Button

Figure 4-14. SNMP Page

2
3 4 5

Table 4-10. SNMP Page Controls

Description
Use these fields to configure SNMP system information, communities
and users for SNMP v1/v2/v3. The information in these fields is for each
record.
After configuring the above fields, press the S
information to a record.
Press this button to open the A
(Figure 4-15) to add a new SNMPv3 user to the SNMP
above. Simply enter information in the fields and select from the
drop-down list boxes the information for the new user and either press
the A button to add a user or the C
DD
operation.
Pressing this button modifies a selected user in the above SNMP
U L by opening the M
SER IST
Simply change the information in the fields or drop-down list boxes for
the user and either press the M
C button to cancel the operation.
ANCEL
Pressing this button deletes a selected user from the above SNMP
U L .
SER IST
(Figure 4-14). Use this page to enter the IP
Table 4-10.
1
N
DD EW
SNMP
ODIFY
ODIFY
4-16
button to save this
AVE
SNMP 3 U screen
V SER
3 U
V
button to cancel the
ANCEL
3 U screen (Figure
V SER
button to modify a user or the
L
SER IST
3
V
4-16).
3
V