Power Supply Page; Figure 2-12. Power Supply Status Page - Summary Pane; Table 2-9. Power Supply Status Page - Summary Pane Controls - Supermicro MicroBlade User Manual

Web-based Management Utility User's Manual
2-3

Power Supply Page

Click a P
OWER
use the commands listed in
To perform a function, first click the box(es) next to the power supplies you wish to issue
a command to and then click the command icon you wish to use. You can also click on
any of the individual power supplies listed to bring up additional pages with details about
that particular power supply's status, and the controls for setting them (see
Supply Status Page" on page
Figure 2-12. Power Supply Status Page – Summary Pane
Table 2-9. Power Supply Status Page – Summary Pane Controls
Item Name
1 Refresh Buttons
2 Redundancy Controls
Fan Control Option
3
Controls
S to reveal the P
UPPLY
Table 2-9
2-15).
1
Description
Pressing either of these buttons refreshes the page display.
These controls allow you to select the Redundancy Option for your
system. Select either the Max Power, Redundancy N+1 or Redunancy
N+N option from the pull-down menu and press the Apply button to
apply your redundancy option to the system.
These controls allow you to select the Fan Control Option for your
system. Select either the User Control or Auto Control option from the
pull-down menu and press the Apply button to apply your fan control
option to the system.
S S
OWER UPPLY TATUS
to control the power supplies in your system.
1
2-14
page (Figure 2-12). You can
"Power
2
3