Node Status - Date & Time Page; Figure 2-8. Blade Status Page - Date &Time Pane; Table 2-6. Blade Status Page - Date & Time Pane Controls - Supermicro MicroBlade User Manual

Web-based Management Utility User's Manual
Node Status – Date & Time Page
Clicking on the D
that are listed and described in
Table 2-6. Blade Status Page – Date & Time Pane Controls
Item Name
Time Update Mode
1
Option Buttons
Daylight Savings
2
Time check box
Apply Above Settings
3 to All Blades check
box
4 Refresh Button
5 Save Button
& T link brings up a D
ATE IME
Table
Figure 2-8. Blade Status Page – Date &Time Pane
4 5
Description
Using these option buttons, you may select either NTP, Local or CMM
mode for time updates to the system. Each mode, when selected,
activates or deactivates fields or drop-down list boxes for specifying date
and time information or the primary or secondary NTP server.
Click this check box if you wish to use daylight savings time for your time
settings.
Use this check box to apply all time and date settings to ALL blades and
nodes in your system rather than just the selected blade or node.
Press this button to refresh the page.
Pressing the S
or blade module.
& T
ATE IME
2-6.
1
2 3
button saves the configuration for the selected node
AVE
2-10
pane (Figure 2-8) with controls