Front Disc Brakes - Jeep cherokee 2000 Service Manual

5 - 4 BRAKES
DESCRIPTION AND OPERATION (Continued)
1 – VACUUM CHECK VALVE
2 – FRONT DIAPHRAGM
3 – REAR DIAPHRAGM
4 – HOUSING
5 – SEAL
6 – AIR FILTER

FRONT DISC BRAKES

DESCRIPTION
The calipers are a single piston type. The calipers
are free to slide laterally, this allows continuous com-
pensation for lining wear.
OPERATION
When the brakes are applied fluid pressure is
exerted against the caliper piston. The fluid pressure
is exerted equally and in all directions. This means
Fig. 1 Power Brake Booster–Typical
7 – PRIMARY PUSH ROD (TO BRAKE PEDAL)
8 – ATMOSPHERIC INLET VALVE ASSEMBLY
9 – BOOSTER MOUNTING STUDS (4)
10 – SECONDARY PUSH ROD (TO MASTER CYLINDER)
11 – MASTER CYLINDER MOUNTING STUD (2)
12 – SPRING
pressure exerted against the caliper piston and
within the caliper bore will be equal (Fig. 2).
directly to the inboard brake shoe. This forces the
shoe lining against the inner surface of the disc
brake rotor. At the same time, fluid pressure within
the piston bore forces the caliper to slide inward on
the mounting bolts. This action brings the outboard
brake shoe lining into contact with the outer surface
of the disc brake rotor.
Fluid pressure applied to the piston is transmitted
XJ