Description And Operation; Suspension Components; Shock Absorbers; Jounce Bumper - Jeep cherokee 2000 Service Manual

Hide thumbs Also See for cherokee 2000:

Table of Contents

DESCRIPTION AND OPERATION (Continued)

2 – SHOCK ABSORBER

3 – UPPER SUSPENSION ARM

4 – STABILIZER BAR

5 – COIL SPRING

The coil springs mount up in the wheelhouse which

is part of the unitized body bracket. A rubber dough-

nut isolator is located between the top of the spring

and the bracket. The bottom of the spring seats on a

axle pad and retained with a clip.

The coil springs control ride quality and maintain

proper ride height. The isolators provide road noise

The lower suspension arms are steel and use bush-

ings at one end of the arm. The arms mount to the

frame rail bracket and the axle brackets.

Fig. 1 Suspension Components (LHD)

6 – JOUNCE BUMPER

7 – LOWER SUSPENSION ARM

8 – TRACK BAR

to loads from the axle. The bushings provide isolation

from the axle. The lower suspension arms can be

used to adjust caster and pinion angle, through the

use of shims at the frame rail bracket.

ber bushings at each end of the arm. The arms

mount to the frame rail bracket and the axle brack-

to loads from the axle. The bushings provide isolation

from the axle.

The arm and bushings provide location and react

The upper suspension arms are steel and use rub-

The arm and bushings provide location and react

Show Quick Links

Chapters

Table of Contents