Configure The Qos Congestion Management - Zte ZXHN H3600 Maintenance Management Manual

ZXHN H3600 Maintenance Management Guide
Parameter
Name
Classification Priority
Packets Classification Criterion
All Interface
Ingress
Source MAC Address
Destination MAC Address
802.1p
VLAN ID
Level 2 Protocol
Source IP
Destination IP
DSCP
Level 3 Protocol
Source Port
Destination Port
TCP ACK
Packets Classification Result
802.1p Re-marking
DSCP Re-marking
Queue Priority
3. Click Apply button to apply the changes.

5.3.3 Configure the QoS Congestion Management

The procedure provides the parameters of QoS congestion management configuration
features.
28
Description
To create a QoS classification, enter the name of the classifica-
tion.
It can be modified by ISP.
Set radiobox On to enable all Interface.
Specify the data traffic direction.
Source host MAC address.
Destination host MAC address.
Specify the 802.1p value to modify the service priority.
Identifies a VLAN. Range: 0–4094. To ensure normal service op-
eration, the VLAN ID must be the same as that set in upper-layer
configuration.
The level 2 protocol includes: Unconcerned, IPv4, IPv6,
PPPoE.
Source host IP address.
Destination host IP address.
DSCP value.
The Level 3 Protocol includes: Unconcerned, TCP,
ICMP.
Source port number of the matching packets.
Destination port number of the matching packets.
Set radiobox On to enable the function of TCP ACK.
802.1p identifier value.
DSCP identifier.
Range:1-8.
SJ-20201203151144-003 | 2021-06-16(R1.0)
ARP and
UDP and