Configuring The Image Capture Application; Capturing Documents - Intermec CN4 User Manual

Capturing Documents

CN4 Series Mobile Computer User's Manual
4 To view saved images, tap Options and choose Gallery.
Tap and
Tap to zoom in, or tap
To discard the image, tap
Options and choose Delete All Files.
To exit the Gallery, tap Options and choose Exit Gallery.
5 To close the application, tap ok.

Configuring the Image Capture Application

The default Image Capture settings apply to most situations where
the ambient lighting is adequate for office work. However, you may
need to change those settings depending on the conditions in which
images will be captured, such as outdoors in bright sunlight or inside
a darkened warehouse.
To configure Image Capture settings
1 Tap Options and choose Settings.
2 Change settings as needed.
3 Tap Options and choose Save Changes and Exit, or choose
Discard Changes and Exit to abandon your changes.
Use the Enhanced Mobile Document Imaging (eMDI) application to
capture documents and create electronic files of printed documents.
Note: A watermark appears in eMDI image files unless you have
purchased a valid license. For more information, contact your
Intermec sales representative.
To start the eMDI application
• Tap Start > Programs > Document Imaging.
to view the images one at a time.
to zoom out.
. To discard all saved images, tap
Chapter 1 — Using the CN4
31