Disabling Security - Intermec CN4 User Manual

Chapter 2 — Connecting and Configuring the CN4

Disabling Security

58
a Tap the <<< button next to the Certificate Path field to select
the user certificate (DER-encoded .cer file without the private
key) to import.
b Tap the <<< button next to the Key Path field to select the
private key (.pvk file) which corresponds to the user certificate
you selected.
To import a certificate from an IAS server:
a Tap Web Enrollment.
b Enter the User, Password, and Server (IP address) to log into
the server.
c Tap OK. A dialog box appears asking if you want to load the
root certificate.
d Tap OK. The Enrollment Tool message box appears telling you
that the certificate has been added.
e Tap OK to close the message box.
If you choose not to use security with your wireless network, you can
disable it on the CN4. Intermec recommends that you always set
security in your network.
To disable security
1 Open Intermec Settings.
2 Choose Communications > 802.11 Radio > Security Choice and
select Microsoft Security. An alert box appears telling you that
you must save your settings and warm boot the CN4 for the new
security choice to take effect.
3 Tap Yes. The CN4 resets and starts with Microsoft Security as the
Security Choice.
4 Open Intermec Settings.
5 Choose Communications > 802.11 Radio > Microsoft Security.
6 For Network Authentication, choose Open.
7 For Data Encryption, choose Disabled.
8 Tap OK. Your settings are saved.
CN4 Series Mobile Computer User's Manual