Selecting A Funk Security Profile - Intermec CN4 User Manual

CN4 Series Mobile Computer User's Manual
Understanding Microsoft and Funk Security
Security Choice Description
Funk (default) Funk security offers features that are similar to Microsoft
security, but Funk also offers these features:
•
•
•
If you are using the CN4 in a static environment that
requires a high level of security, you should use Funk
security.
To use Funk security, you need to select a profile. For
help, see the next section,
Profile."

Selecting a Funk Security Profile

You can define up to four profiles for Funk security. Different profiles
let your CN4 communicate in different networks without having to
change all of your security settings. For example, you may want to set
up one profile for the manufacturing floor and one for the
warehouse. By default, the active profile is Profile 1.
Note: You can also use the Profile Wizard to configure most wireless
security settings. To start the Profile Wizard, tap the iConnect icon
( ) in the lower right corner of the Today screen and select Tools >
Wireless Settings.
To select a Funk security profile
1 Start Intermec Settings.
2 Choose Communications > 802.11 Radio > Funk Security.
3 Tap a profile. A list of configurable settings appears.
4 (Optional) In the Profile Label text box, enter a meaningful name
for your profile.
5 Configure your security settings. For help, see the next sections.
6 Repeat Steps 3 through 5 for each profile you want to define.
7 Select one profile as the active profile by tapping Active Profile
and choosing a profile from the list.
Chapter 2 — Connecting and Configuring the CN4
CCX v4.0 compliance
Support for LEAP and TTLS
Configuration of up to four profiles
"Selecting a Funk Security
49