Configuring The Phone; Activating The Cdma Phone - Intermec CN4 User Manual

Chapter 2 — Connecting and Configuring the CN4

Configuring the Phone

Activating the CDMA Phone

38
The CN4 supports two types of cellular phone technology:
• CDMA EV-DO Rev A
• UMTS and GSM/EDGE
With the radio module installed in the CN4, you can send and receive
telephone calls as well as transmit data through wide-area (WAN)
cellular networks.
The CN4 provides a phone speaker, microphone, and speakerphone.
It also supports Bluetooth headsets or hands-free kits.
The factory default setting for the phone is enabled. After you activate
the phone, you can customize the features of the phone and network
settings. For help, refer to the Windows Mobile online help on your
CN4.
The CDMA WAN radio module is installed at the factory. To activate
your CDMA CN4 device, you need to contact the carrier you have
chosen and set up accounts for each device. Use the following table to
view the carriers that Intermec currently supports. If your carrier is
not listed in the table, please contact Intermec product support to see
if it is now supported.
Currently Supported Carriers
Country
United States
Canada
The carrier will require the Electronic Serial Number (ESN) to start
the activation process. You can find the ESN:
• on a label located in the upper right corner of the battery
compartment.
• on the outside of the CN4 shipping box.
Carrier
Alltel, Sprint, Verizon
Bell Mobility, Telus
CN4 Series Mobile Computer User's Manual