Chapter 2 — Connecting and Configuring the CN4
44
2 Make sure that your Bluetooth scanner is on.
3 When prompted, enter the passcode for your scanner. The default
passcode for Intermec Bluetooth scanners is 0000.
4 Tap Finish.
To connect to a Bluetooth scanner with the Bluetooth Scanner Wizard
1 Select Start > Settings > the System tab > Wireless Scanning.
2 Follow the onscreen instructions to connect to a wireless scanner.
Configuring Bluetooth for Wireless Printing
1 Make sure Bluetooth power is on. For help, see the procedure in
"Configuring Bluetooth Communications" on page 42.
2 Select Start > Settings > the System tab > Wireless Printing.
CN4 Series Mobile Computer User's Manual